Part Number: W0133-1812874
Notes: Remanufactured - California The OE alternator is equipped with a 2-pin connector. Some replacement alternators may use a 3-pin connector, but the third pin is for plug location purposes only and has no effect on the performance of the replacement alternator. Reuse of the pulley from the old alternator may be required.

Part Number: W0133-1602797
Notes: Remanufactured - 70-Amp w/ 79mm Pulley Bosch advises that cars used for short trip, low speed driving may suffer from insufficient battery charging even when alternator output is within spec. Cars with this problem that currently use the 79mm-pulley (70 amp) alternator should switch to the 69mm-pulley alternator (AL 338 X/BOS, 90 amp) or obtain the smaller diameter pulley from the Nissan dealer. Use of the smaller pulley may also require a change from the original 740mm belt to a 4PK-0730 belt instead. . This alternator can be either Hitachi or Mitsubishi brand. The two brands may differ in appearance, but either brand alternator will work on this application.

Part Number: W0133-1606639
Notes: Remanufactured - 90-Amp w/ 69mm Pulley BEFORE installing this alternator, refer to Application Notice #B-35 in the Bosch reman catalog regarding the pulley diameter. This unit is equipped with the smaller 69mm pulley which may require the use of a shorter drive belt.

Part Number: W0133-1767287

Part Number: W0133-1724525
Notes: Remanufactured The OE alternator is equipped with a 2-pin connector. Some replacement alternators may use a 3-pin connector, but the third pin is for plug location purposes only and has no effect on the performance of the replacement alternator. Reuse of the pulley from the old alternator may be required.

Part Number: W0133-1725410
Notes: The OE alternator is equipped with a 2-pin connector. Some replacement alternators may use a 3-pin connector, but the third pin is for plug location purposes only and has no effect on the performance of the replacement alternator. Reuse of the pulley from the old alternator may be required.

Part Number: W0133-1606639
Notes: Remanufactured - 70-Amp w/ 79mm Pulley Bosch advises that cars used for short trip, low speed driving may suffer from insufficient battery charging even when alternator output is within spec. Cars with this problem that currently use the 79mm-pulley (70 amp) alternator should switch to the 69mm-pulley alternator (AL 338 X/BOS, 90 amp) or obtain the smaller diameter pulley from the Nissan dealer. Use of the smaller pulley may also require a change from the original 740mm belt to a 4PK-0730 belt instead. . This alternator can be either Hitachi or Mitsubishi brand. The two brands may differ in appearance, but either brand alternator will work on this application.

Part Number: W0133-1603026
Notes: The OE alternator is equipped with a 2-pin connector. Some replacement alternators may use a 3-pin connector, but the third pin is for plug location purposes only and has no effect on the performance of the replacement alternator. Reuse of the pulley from the old alternator may be required.

Part Number: W0133-1724426
Notes: Remanufactured The OE alternator is equipped with a 2-pin connector. Some replacement alternators may use a 3-pin connector, but the third pin is for plug location purposes only and has no effect on the performance of the replacement alternator. Reuse of the pulley from the old alternator may be required.

Part Number: W0133-1600374
Notes: Bosch lists two possible alternators for this application. If the two pins for the wire plug are arranged in a "--" formation (most 00-01 models), use Bosch AL 2389 X, Denso 210-3105, or Hitachi 23100-2Y900R. If the two pins are arranged in an "=" formation (a few '01 models) use Bosch AL 2374 X or Denso 210-3137.

Part Number: W0133-1606639
Notes: Remanufactured

Part Number: W0133-1600374
Notes: Bosch lists two possible alternators for this application. If the two pins for the wire plug are arranged in a "--" formation (most 00-01 models), use Bosch AL 2389 X, Denso 210-3105, or Hitachi 23100-2Y900R. If the two pins are arranged in an "=" formation (a few '01 models) use Bosch AL 2374 X or Denso 210-3137.

Part Number: W0133-1603897
Notes: Remanufactured 70-amp w/ 79mm pulley (see NOTE!!) Bosch advises that cars used for short trip, low speed driving may suffer from insufficient battery charging even when alternator output is within spec. Cars with this problem that currently use the 79mm-pulley (70 amp) alternator should switch to the 69mm-pulley alternator (AL 338 X/BOS, 90 amp) or obtain the smaller diameter pulley from the Nissan dealer. Use of the smaller pulley may also require a change from the original 4PK-0740 belt to a 4PK-0730 belt instead. . This alternator can be either Hitachi or Mitsubishi brand. The two brands may differ in appearance, but either brand alternator will work on this application.

Part Number: W0133-1600683
Notes: Remanufactured

Part Number: W0133-1724426
Notes: Remanufactured - Exc. California The OE alternator is equipped with a 2-pin connector. Some replacement alternators may use a 3-pin connector, but the third pin is for plug location purposes only and has no effect on the performance of the replacement alternator. Reuse of the pulley from the old alternator may be required.