Part Number: W0133-1623004

Part Number: W0133-1616453

Part Number: W0133-1796888

Part Number: W0133-1625357
Notes: Unless the brake pad sensor that plugs into the backing plate has been subjected to excessive wear, it is normally reusable. Pad sets ISD486, D1250D, and D1250M do not include a fresh sensor. Pad sets ACT486 and 139-56-03 includes a replacement sensor, heat-shrink tubing, and instructions for adapting the new sensor to the existing sensor wiring.

Part Number: W0133-1625357
Notes: Unless the brake pad sensor that plugs into the backing plate has been subjected to excessive wear, it is normally reusable. Pad sets ISD486, D1250D, and D1250M do not include a fresh sensor. Pad sets ACT486 and 139-56-03 includes a replacement sensor, heat-shrink tubing, and instructions for adapting the new sensor to the existing sensor wiring.

Part Number: W0133-1610940

Part Number: W0133-1627407
Notes: Unless the brake pad sensor that plugs into the backing plate has been subjected to excessive wear, it is normally reusable. Pad sets ISD486, D1250D, and D1250M do not include a fresh sensor. Pad sets ACT486 and 139-56-03 includes a replacement sensor, heat-shrink tubing, and instructions for adapting the new sensor to the existing sensor wiring.

Part Number: W0133-1796886
Notes: The original pad set used a removable electrical wear sensor on one pad, which Nissan eliminated in mid-'94 in favor of a mechanical sensor attached to two of the pads. Of the brands we offer, only the NPN set still has the one pad drilled to accept the electrical sensor. The other brands (PBR, Akebono, Sumitomo) are equipped with the later-style mechanical sensors instead. If updating to the later-style pads, please remove or tie back the sensor wiring to prevent interference with other parts on the car.

Part Number: W0133-1619387

Part Number: W0133-1622251
Notes: The original pad set used a removable electrical wear sensor on one pad, which Nissan eliminated in mid-'94 in favor of a mechanical sensor attached to two of the pads. Of the brands we offer, only the NPN set still has the one pad drilled to accept the electrical sensor. The other brands (PBR, Akebono, Sumitomo) are equipped with the later-style mechanical sensors instead. If updating to the later-style pads, please remove or tie back the sensor wiring to prevent interference with other parts on the car.

Part Number: W0133-1622251

Part Number: W0133-1619387
Notes: The original pad set used a removable electrical wear sensor on one pad, which Nissan eliminated in mid-'94 in favor of a mechanical sensor attached to two of the pads. Of the brands we offer, only the NPN set still has the one pad drilled to accept the electrical sensor. The other brands (PBR, Akebono, Sumitomo) are equipped with the later-style mechanical sensors instead. If updating to the later-style pads, please remove or tie back the sensor wiring to prevent interference with other parts on the car.

Part Number: W0133-1622251

Part Number: W0133-1724939

Part Number: W0133-1796886
Notes: Although the OE parts info indicates otherwise, we have had a few reports of mid-'94 and later models that were still equipped the early-style pads (with electrical wear sensor). If such is the case for your vehicle, please refer to the note attached to earlier pad set #44060-66U85 for specific info on pad availability.