Part Number: W0133-1734239
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1734239
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1786993
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1786993
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1734239
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1786993
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1786993
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1734239
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1734239
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.

Part Number: W0133-1786993
Notes: w/ Servotronic Two sizes of locator pins are used in the free-floating side of the rack housing. The early production models use an 8mm pin and locator opening while the later production housings use a 10mm pin and opening. This difference is easily accommodated by either using the correct pin size or utilizing the 8mm pin for all applications. The locator pin is just a guide and not a critical performance item.