Part Number: W0133-1617479
Notes: Exhaust - 105.1mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617517
Notes: 103.9mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617479
Notes: Exhaust - 105.1mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617517
Notes: 103.9mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1622585
Notes: 91.2mm

Part Number: W0133-1617517
Notes: 103.9mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617517
Notes: 103.9mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617479
Notes: Exhaust - 105.1mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617479
Notes: Exhaust - 105.1mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617479
Notes: Exhaust - 105.1mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617479
Notes: Exhaust - 105.1mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617479
Notes: Exhaust - 105.1mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1622585
Notes: 91.2mm

Part Number: W0133-1617479
Notes: Exhaust - 105.1mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st

Part Number: W0133-1617517
Notes: 103.9mm *New hydraulic lifters are recommended by VAG to be replaced at the same time as new valves are also replaced. It is further recommeded that the lifters are allowed to "Settle" for a minimum of 30 mins to allow excess oil to drain. If this recommendation is not complied with, somes valves will contact the piston. This will cause the valve to break at the collet groove. It is also ideal if the engine be allowed rest over night before starting the engine for the first time. Engine should be turned by hand 1st